Receive alerts when this company posts new jobs.
Manual Lathe Operator in Houston, TX at PrideStaff
Fast Growing Family Operation in Northwest Houston
Pay $16 to $20/hr DOE
Location:290 and Beltway, NW Houston
Working hours:Monday through Friday 7AM to 3:30PM, possible Saturday 7AM to 1PM depending on workload.
You will be performing machining operators on manual lathes with up to 28' swing.
Turn the outside diameter of round bars from 2” to 30” diameter both hollow tubes and solid bars; to specific close tolerances; plus/minus 0.005”.
Capable of indicating parts in 4-jaw chucks on hollow spindle and engine lathes.
Capable of aligning to the internal bore of parts by wall thickness testing and offsetting part; OD/ID concentric turning.
Able to machine contours, bevels and angles per prints or instructions. Read and understand blueprints. Select tool holders and carbide tool geometry plus carbide grades to machine all types of materials including incoloy and inconel grades.
Working use of O.D. and I.D. micrometers as well as T-mike wall thickness testers. Able to use additional measuring equipment and calculate math equations.
Capable of setting machine parameters to achieve surface finish requirements on materials and optimum use of carbide tools.
Additional Requirements: Must have complete set of hand tools plus indicators, measuring rules and tapes; OD and ID micrometers are available for use. Employee owned 0”-6” OD micrometers helpful
Experience Required: GED or High school diploma. Machine shop and/or lathe trade school helpful. 4-years manual lathe experience operating medium to large lathes.
Benefits: Paid Holidays and Vacation/Rental Uniforms available after 90-days
Shift Hours: 7:00A.M. to 3:30 P.M. Monday thru Friday and Saturdays till 1 pm depending on workload.
To apply go online at www.pridestaff.com/houstonnw or call 832 604-2255 for more information!